Internal Waterproofings-Plastit® WPL

Plastit WPL is water based Admixture and is supplied as a white liquid emulsion. Plastit WPL is a multipurpose, concentrated liquid polymer for making modified concrete, mortars, screed and render with better performance, improved mechanical properties and lower penetration against water, chloride and some typical chemicals

Allows a reduction in mix water content to be made without affecting workability, so reducing permeability 
 Provides integral protection, ensuring reduced permeability throughout the concrete and mortars
 Integral protection is maintained even if surface damage occurs 
 Lower water: cement ratio improves compressive strength at the same workability

As an integral waterproofer for
Structural and precast concrete
Sand : Cement renders
 Floor screeds
 Mortars and Plasters

The optimum dosage of Plastit WPL to meet specific requirements should always be determined by trials using the materials and conditions that will be experienced in use. This allows the optimization of admixture dosage and mix design and provides a complete assessment of the mix. As a guide, an addition rate of 2% to 4% by weight of cement

Appearance White Liquid
 Chloride  Nil to BS5075 

Plastit WPL is available in 20 kg containers
 Plastit WPL has a minimum shelf life of 6 months at 35°C if kept in a dry store in the original, unopened packs. The shelf life will be reduced at higher ambient temperatures