Language^

Internal Waterproofings-Plastit® WP

Plastit WP is a chloride free integral waterproofing admixture and is supplied as a white powder. It is formulated from a blend of hydrophobic materials; which together form a matrix of insoluble, water resistant material within the cement paste

Allows a reduction in mix water content to be made without affecting workability, so reducing permeability
 Provides integral protection, ensuring reduced permeability throughout the concrete and mortars
 Integral protection is maintained even if surface damage occurs, unlike applied surface films or coatings
 Lower water: cement ratio improves compressive strength at the same workability 
 Formulated for use in the Middle East

As an integral waterproofer for
 Structural and precast concrete
Sand : Cement renders
 Floor screeds 
 Mortars and Plasters

The optimum dosage of Plastit WP to meet specific requirements should always be determined by trials using the materials and conditions that will be experienced in use. This allows the optimization of admixture dosage and mix design and provides a complete assessment of the mix. As a guide, an addition rate of 1% - 3% by weight of cement

Appearance White Liquid
 Chloride  Nil to BS5075 

Packaging
 Plastit WP is available in 20 kg bags 
Storage
 Plastit WP has a minimum shelf life of 12 months at 35°C if kept in a dry store in the original, unopened packs. The shelf life will be reduced at higher ambient temperatures