Language^

Floorings-Hardfloor®

Hardfloor surface hardening compound is a quality controlled, factory blended powder which is ready to use on site. It consists of special hard wearing emery aggregates selected for their physical properties of abrasion and wear resistance, Portland cement and special additives to improve workability. This combination produces a material which is easy to trowel in the surface of fresh, wet concrete. Hardfloor cures monolithically to provide a dense, non porous surface which is extremely hard wearing and abrasion resistant. Monolithic cure ensures that problems normally associated with thin (‘granolithic’) screeds, e.g. curling, shrinkage, cracking, etc. are completely overcome.

Supplied ready to use - no additives required
 Provides a hard, abrasion resistant surface
 Forms monolithic bond with fresh concrete base
 Hard, dense surface resistant to oils and grease
 Range of colours
 improve working environment
 Non-metallic aggregate
will not rust when wet

Hardfloor provides a highly abrasion resistant surface to fresh concrete floors by the dry shake method which ensures that the hard wearing surface bonds monolithically to the base concrete. It is ideally suited for all industrial areas subjected to heavy traffic such as: power stations, heavy industry, agricultural building, distillation plants, laboratories, car parks, abattoirs, warehouse floors and loading bays & work shops

Check(TDS)
Check(TDS)

Packaging
 Hardfloor is available in 25 kg bags
 Storage
Hardfloor has a minimum shelf life of 12 months at 20°C if kept in a dry store in the original, unopened packs. The shelf life will be reduced at higher ambient temperatures