Language^

Concrete and Tile Adhesives-Tilex® V2

Tilex V2 is supplied as a single component pack, which requires only the on-site addition of clean water to produce a consistently high performance adhesive, suitable for the following substrates
 Concrete
Ceramic, Tile & Stone
 Cement Plaster
 Brick Masonry
 Concrete Masonry
 Cement Terrazzo
 Cement mortar beds
 Ceramic backer board

Formulated to suit Middle East conditions
Enhanced bond and tensile strengths
Good open time & slip resistance
Safe and easy to use
 Water resistant
 suitable for submerged conditions
Early return to service

Tilex V2 is a high quality adhesive for the permanent fixing of ceramic wall and floor tiles including porcelain and fully vitrified tiles, ceramic mosaics, quarry tiles, dark natural stone, terrazzo and brick slips. Typical uses include 
 Wet areas
 kitchens and bathrooms
 Swimming pools
( Fixing marble tiles (up to 40 kg/m2 on vertical 
 Fixing heavy elements e.g. brick slips, concrete tiles
 Bridges, underpasses and high rise buildings
 External claddings

(CHECK(TDS

Appearance White & Gerey Powder
Specific gravity Typically 1.45 gr/cm3 @ 20°C
 Flexibility  Good 
 Open time (25°c)  Approx. 20 min
 Tensile adhesive strength  ≥ 1.5 N/mm2

Packaging
Tilex V2 is available in 20 kg bags
 Storage
Tilex V2 has a minimum shelf life of 12 months at 35°C if kept in a dry store in the original, unopened packs. The shelf life will be reduced at higher ambient temperatures