Concrete Surface Repairs-Softcoat

Softcoat is supplied as a ready to use blend of dry powders, which requires only the addition of clean water to produce a highly consistent cementitious repair mortar suitable for structural concrete and masonry repairs. Softcoat contains no metallic aggregate and is chloride free. Softcoat is formulated for sprayed or trowelled applications, in thicknesses upto 30 mm in one layer by hand application. Greater thicknesses can be achieved when spray applied

Wet or dry spray application
rapid application of large quantities
 Low rebound
when dry spray applied rebound is minimal with subsequent saving in material cost
Low permeability
 gives excellent resistance to attack by aggressive elements

Softcoat is suitable for sprayed or trowelled applications, with high build characteristics. Typical applications would include, but not be limited to, the following
  All types of structural repair which can be applied by trowel or wet spray
 Repair of structural members subjected to repetitive loading including application in trafficked areas
Repairs to reinforced or pre-stressed beams or columns
 Repairs in industrial area, especially those containing mineral oils, lubricants etc
Repairs in marine environments


Softcoat is available in 25 kg bags
Softcoat has a minimum shelf life of 12 months at 20°C if kept in a dry store in the original, unopened packs. The shelf life will be reduced at higher ambient temperatures