Concrete Superplasticizers-Plastit® SPN215

Plastit SPN215 is a chloride free, superplasticising admixture based on selected polymer modified napthalene sulphonate dispersives. Plastit SPN215 disperses by electro kinetic action in the concrete mix, enabling the water phase of the concrete to perform more effectively.

 High range water reducing property allows the production of high quality concrete without excessive cement contents ensures improved durability 
Improved cohesion and particle dispersion minimizes segregation and bleeding and improves pump ability 
 Chloride free, safe for use in precast, prestressed and reinforced concrete

 Specifically developed for use in high quality concrete for work ability retention at low water content
 Provides good pump able concrete - Recommended for piling and mass concrete pours with improved cohesion

The optimum dosage of Plastit SPN215 to meet specific requirements should always be determined by trial mixes using the materials and conditions that will be experienced in use. For normal concrete a dosage between 0.4% to 1.5% by weight of cement may be used

Appearance Brown Liquid
Specific gravity 1.18 gr/cm3 at 20°C
Chloride Nil to BS5075
Air entrainment Typically less than 2% additional air is entrained at normal dosages
Alkali content Typically less than 55.0 g. Na2o equivalent/litre of admixture. A fact sheet on this subject is available.

Plastit SPN215 is available in 20 kg containers and 240 kg drums
Plastit SPN215 has a minimum shelf life of 12 months provided the temperature is kept within the range of 5°C to 35°C. Should the temperature of the product fall outside this range then contact CAPCO for advice. Freezing point: Approximately -2°C