Language^

Concrete Hiperplasticizers-Plastit® SPCR

Plastit SPCR is differentiated from conventional super plasticisers in that it is based on a unique carboxylic ether polymer with long lateral chains. This greatly improves cement dispersion. At the start of the mixing process electrocstatic dispersion occurs but the presence of the lateral chains, linked to the polymer backbone. Generate a steric hindrance which stabilizes the cement particle’s capacity to separate and disperse. This mechanism considerably reduces the water demand in flowable concrete. Plastit SPCR combines the properties of water reduction and workability retention. It allows the production of high performance concrete and/or concrete with high workability. Plastit SPCR is a particularly strong hyperplasticiser allowing production of consistent concrete properties around the required dosage

Increased early and ultimate compressive strengths
 Controlled retardation extends working life and stiffening time for ease of construction
 Increased flexural strength
Improved adhesion to reinforcing and stressing steel
 Improved resistance to carbonation
Lower permeability
 Increased resistance to aggressive atmospheric conditions
 Reduced shrinkage and creep
Increased durability

Plastit SPCR is a high performance hyper plasticiser intended for applications where increased early and ultimate compressive strengths are required, and it has been developed for use in
  Self compacting concrete
 Pumped concrete
 Concrete requiring long workability retention
 High performance concrete
Per-cast concrete

The optimum dosage Plastit SPCR to meet specific requirements should always be determined by trials using the materials and conditions that will be experienced in use. The normal dosage range is between 0.3 to 1.0 kg/100 kg of cementitious material

Appearance Light Brown Liquid
Specific gravity <1.08 gr/cm3 at 20°C
Chloride Nil to BS5075
Air entrainment Typically less than 2% additional air is entrained at normal dosages
Alkali content Typically less than 5 g. Na2o equivalent/litre of admixture. A fact sheet on this subject is available.

Packaging
Plastit SPCR is available in 20 kg containers and 200 kg drums
Storage
Plastit SPCR has a minimum shelf life of 12 months provided the temperature is kept within the range of 5°C to 35°C. Should the temperature of the product fall outside this range then contact CAPCO for advice. Freezing point: Approximately -2°C